27 December 2011: 14:37 – 15:41 UTC
80 CW QSO on 10118 kHz – pile-ups would never stop
After GW/SW-003 in the morning the Watt’s Up Meter showed after this activation:
12.94V / 0.35 A during RX of the K2
12.2Wh / 0.959Ah which I used for all 33 QSO
12.74Vm – Volt Minimum
25.1Wp – Watt Peak
1.94Ap – Ampère Peak
Car park: 51.716281 N / 3.555096 W
Hiking statistics – uphill only:
Time: 52min with a few detours
Distance: 2.3km
Total Ascend: 148m
Total Descend: 60m
-
- QSL card for the GW/SW-010 – Craig y Llyn activation.
-
- Between the car park and my activation QTH.
-
- My side of the pile ups. After 1h they still did not ceace and as the night set in I had to call it a day.
-
- My QTH withing the activation zone near the hill top.
-
- View from the car park direction Brecon Beacons National Park.
HB9CZF 